Smart v3.1 BLTouch – Auto Bed Leveling Touch Sensor

$34.98

Official BLTouch Smart v3.1 Auto Bed Leveling Sensor from ANTCLABS.

This sensor is a high-precision touch based sensor used for auto bed leveling that can be used on any type of bed surface.

For manual and integration information, please visit https://www.antclabs.com/manual

38 in stock (can be backordered)

SKU: BLTOUCH Categories: ,

Description

Official BLTouch Smart v3.1 Auto Bed Leveling Sensor from ANTCLABS.

The BLTouch Auto Bed Leveling sensor is a high-precision touch based sensor. It is used for auto bed leveling on 3D printers. It can be used on any type of bed surface including: glass, aluminum, bed surface sheets (such as BuildTak or Wham). Because temperature, metal detectable or proximity bed leveling sensors can have issues with different bed surfaces and thicknesses, the BLTouch sensor makes the most versatile auto bed leveling sensor around.

For manual and integration information, please visit https://www.antclabs.com/manual

Summary
BLTouch is a type of semiconductor hall sensor and is an electronic component for 3D printers.
BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.

Features
Main functions and controls of BLTouch are the same as usual auto bed leveling sensor, consists of RC servo and micro switch. Thus, BLTouch can be applied on almost every board.

BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensor. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.

Simple
BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed leveling sensor, Gathering information & setting up your firmware will be an easy task.

Smart
Self-test : The push pin operate two times in a test when the power is on.
Alarm : The LED light blinks if a problem was found on a self-test or during operation
Wiring defect indicator : Blue and Red LED for indicating wiring defects.

​High-precision
BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.

​Logic Voltage Free(Open Drain Output)
3.3V / 5V logic voltage free(default).

​Long stroke : ≒ 6.5mm
The stroke is up to 1.6mm longer than V2.0

You may also like…