Magigoo Original 50ml

$19.95 $18.95

Available end of October

Magigoo – the 3D printing adhesive

Magigoo is an easy to use 3D printing adhesive designed to address ‘the first layer not sticking problem’. Magigoo ensures a strong adhesion to the hot plate. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick! In addition, Magigoo helps to prevent warping. Isn’t it magic? Regardless of you being a hobbyist or professional – it is extremely rewarding to have a 30 hour print complete without any warping and having it release easily once cooled.

*Note: Do not squeeze the bottle without the applicator on the end being pressed as the pressure will cause the applicator to pop off and you may lose all of your Magigoo.

100 in stock (can be backordered)

SKU: MAGOR50 Categories: ,

Description

Magigoo – the 3D printing adhesive

All you need for sure adhesion of 3D prints.

Magigoo is an easy to use 3D printing adhesive designed to address ‘the first layer not sticking problem’. Magigoo ensures a strong adhesion to the hot plate. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick! In addition, Magigoo helps to prevent warping. Isn’t it magic? Regardless of you being a hobbyist or professional – it is extremely rewarding to have a 30 hour print complete without any warping and having it release easily once cooled.

  • Over 100 applications
  • ABS, PLA, PETG, HIPS, ASA, TPU
  • Easy application
  • Easy release
  • Easy clean
  • No smell
  • Non-toxic
  • No additional tools needed
  • Easy to transport
  • Nicer print finish

*Note: Do not squeeze the bottle without the applicator on the end being pressed as the pressure will cause the applicator to pop off and you may lose all of your Magigoo.

Get a single pen. We are sure you will be back for more … it is that good