Bondtech DDX v3 For Creality

$99.00

-

To use with:

  • Creality Ender-3 / Ender-3 Pro
  • Creality Ender-5 / Ender-5 Pro
  • Creality CR-10
  • Creality CR-10S
  • Creality CR-10 S4
  • Creality CR-10 S5

This set is necessary to install a DDX Upgrade Kit on the models mentioned above.

Requires your printer to have a 40x40x10mm Radial Fan.

1 in stock (can be backordered)

SLS Universal BL Touch Mount For DDX

  • Mount a BL Touch bed levelling sensor onto the DDX.
  • Part made of PA12 (Nylon) with the SLS 3D printing process.
  • Better surface finishing and higher working temperature resistance.
  • Universal slot – allows for height adjustment.

Smart v3.1 BLTouch - Auto Bed Leveling Touch Sensor

Official BLTouch Smart v3.1 Auto Bed Leveling Sensor from ANTCLABS.

This sensor is a high-precision touch based sensor used for auto bed leveling that can be used on any type of bed surface.

For manual and integration information, please visit https://www.antclabs.com/manual

BLTouch 1 Meter Extension Cable

1 Meter Servo Extension Cable for use with the BLTouch Bed Leveling Sensor

Note: The remaining extension cables I have in stock are varied colors, not the yellow/orange/brown/black/white but all of the connectors are the same.

DDX v3 Adapter Set For Creality Ender / CR-10

To use with:

  • Creality Ender-3 / Ender-3 Pro
  • Creality Ender-5 / Ender-5 Pro
  • Creality CR-10
  • Creality CR-10S
  • Creality CR-10 S4
  • Creality CR-10 S5

This set is necessary to install a DDX Upgrade Kit on the models mentioned above.

Requires your printer to have a 40x40x10mm Radial Fan.

SKU: EXT-KIT-77-V3 Categories: , , ,

Description

The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden extruder with a direct drive extruder setup. It is a high-performance Dual Drive extruder based on the BMG Bondtech Mini Geared.

Multiple Hotends Compatibility

This model was created to be compatible with the original hotend of each compatible Creality model, except with the hotend in CR-10S V2/V3. It is also compatible with users of Micro Swiss hotends (Micro Swiss Adapter required).
Users may upgrade the hotend to Copperhead™ or Mosquito™.

DDX Adapter set required

The DDX will be compatible with most Creality 3D printers from Ender and CR series. The DDX requires an adapter set for each model, or set of models.

DDX Adapter Set For Creality Ender / CR-10