30cm XS Series PTFE Heat Break Liner for 1.75mm Filaments

$7.79

-

This heat break liner is made from the same pure virgin PTFE material, with high lubricity additives, as our XS Series Bowden Tubing. But its sized for a heat break, with a 1 mm smaller outer diameter.

An average heat break requires around 30 mm of tubing or less. We give you 30 cm, enough to make ten heat breaks.

76 in stock (can be backordered)

SKU: CAPHBL Categories: ,

Description

This heat break liner is made from the same pure virgin PTFE material, with high lubricity additives, as our XS Series Bowden Tubing. But its sized for a heat break, with a 1 mm smaller outer diameter.

An average heat break requires around 30 mm of tubing or less. We give you 30 cm, enough to make ten heat breaks.