HERZ – Metallic Pearl – PETG

Included in: UFO002 - Aug-2018

Metallic Pearl

Color: Metallic Pearl
Information is basic for filament type, for brand specific information please visit the brand's website.
  1. PETG (Glycol modified Polyethylene Terephthalate) is generally as easy to print as PLA but at higher temps and heated bed is required. It is semi-rigid and has decent impact resistance, but less "give" than PLA and can snap easier without the extra flex. Can be stringy, using wiping and playing with the temperature by a couple degrees can eliminate the stringing. Some swear by drying the filament in a filament dryer before using, I've personally found playing with the temperature works great, and that's living in high humidity Florida with filament sitting out for years. Hotend: 230 - 250°C Bed: 70 - 90°C Speed: 30 - 100mm/s Fan: Low to Medium, 100% for bridging.
  1. Brand information provided by brand website