
I apologize for the lack of trading cards this month, the ones I had ordered were for the colors I originally ordered but had to swap out with different filament as some didn’t arrive in time. As in the past I also planned on Holiday cards, however I did not receive them either *sighs*
I truly hope everyone had a great holiday experience, whichever holidays you and your family celebrate. Here’s to a new year of possibilities!
As always, thank you so much for sticking with me through the crazy times, I know I keep saying this but... things are about to get better and I really think you’ll all be really happy with the upcoming changes that are planned. I wish you all an amazing new year!
Thank you,
Josh ~Alien3D
Congrats to Kevin P.
for winning the December 2021 Mothership Box!
This month, the Mothership prize is a Fula-Box Fulament Dry Box

SWAG & CODES
- Peppermint Hersey Kisses
Please login to view codes if you received this months UFO.

Filament Samples
All filament samples are at least 20 meters in length (actually more, I increased the length to eat up the extra filament being left behind on the rolls)
Secret Santa Alien3D Filaments
Below you'll find the images and names of all of the filament included in December 2021's UFO. Each UFO received 4 filaments randomly from this selection.
PLA: Print Temp:190 – 220°C, Bed Temp:0 – 50°C
I hope you enjoy the selection of filaments you received. They may be the last of Alien3D Branded filaments due to upcoming announcements. For those who don't know, Alien3D Branded filaments were produced by IC3D for the Ooze and PROBED lines, and the Silks, Glitters and Specialty Filaments were produced by Hello3D. Any companies selling Hello3D filament should have the colors available.
Moon Dust Sparkle
Meteor Mined Gold
Milky Way White
Particle Pink
Gamma Ray Green
Venus Pink
Saturn Ring Gold
Bellatrix Blue
Supernova Orange
Mars Red
Neptune Blue
Solar Flare Yellow
Solar Flare Green
Pulsar Purple
Ionic Blue
Nebula Purple
Black Hole
Solar Flare Orange
Supernova Yellow
Bonus Accessory!
Nano Gloop PLA

Bonus Project!
Magnetic Ice Skating Rink
Yes, this is a duplicate project from 2018, but way back then there were only about 50 subscribers lol. It's always been one of my favorite, designed by Bryan over at BV3D. For 2021, Fernando expanded on Bryan's original design to include a diorama skating rink! While it's late for this December, I'm hoping maybe you'll be able to set it up for years to come!
- Gearmotor
- 6 - 2 x 6mm Magnets
- 6 - Washers
- 2 - M3x10 Bolt
- 2 - M3x25mm Bolt
- 3 - M3x12mm Bolt
- 2 AA Battery Pack with on/off switch
Check out Fernando and please thank him for taking on UFO project development for me!
3D Printed Ice Rink Diorama
— Dsk001 (@Dsk001_3D) December 31, 2021
Project for @alienslacker UFO December 2021 Box
Files available at #prusaprinters and @MyMiniFactory https://t.co/GYg89Bjq6N
Thanks to @Bryan_Vines for the original project this was remixed from pic.twitter.com/gvOQGTfNxt
Community Reaction
-
Alien3D U.F.O. Filament Mystery Box - January 2019 - Chris's Basement
-
Alien3D U.F.O. Monthly Mystery Box - Jan 2019
-
Alien 3D Box Project // January 2019 // Temperature & Humidity Sensor
-
January 2019 Alien 3D UFO Box Unboxing
-
January U.F.O. Box Reveal
-
January Alien3D UFO Mystery Box!
-
Kuntry Time - Alien 3D UFO box January
-
January 2019 Alien3D UFO Monthly Subscription box review
Comments 1
My Ender 3 pro’s build plate is too small for the base of the ice rink. Is there a suggested size to shrink the build? Or would that not work? I thought I would comment here instead of Twitter if someone has a similar question. Thanks!