MRRF 2019 Alien3D 12 Foot Tall Community Print

Okay, so by now you may have seen my Alien3D Mascot designed by Garrett and Chelsey at ChaosCoreTech Well, I wanted to do something for MRRF 2019, and I wanted to do something BIG… unfortunately I went TOO big for me to get it done in time. So here’s the scoop… 12 Foot Tall Alien3D Mascot! Yes you heard right, …

October 2018 UFO Contents

Thank You to this month’s sponsors and contributors and companies who didn’t try to shoot our UFO’s out of the sky for using their product in this month’s box. The October 2018 UFO Mystery 3D Printing Box has landed. I would like to thank those who subscribed this month! Below you will find details of what was contained in this …

September 2018 UFO Contents

The September 2018 UFO Mystery 3D Printing Box has landed. I would like to thank those who subscribed this month! Below you will find details of what was contained in this month’s box! If you have not signed up to start receiving your box next month, click here to get more details! This month was my first semi-themed UFO box. …

August 2018 UFO Contents

The August 2018 UFO Mystery 3D Printing Box has landed. I would like to thank those who subscribed this month! Below you will find details of what was contained in this month’s box! If you have not signed up to start receiving your box next month, click here to get more details! Congrats to Kyle for receiving the August 2018 …

July 2018 UFO Contents

Welcome to the Inagural UFO Mystery 3D Printing Box. I would like to thank those who subscribed this month! Below you will find details of what was contained in the July 2018 UFO Mystery 3D Printing Box! If you have not signed up to start receiving your box next month, click here to get more details! Congrats to Mitchell Lucas …

Anet A8 Minimal Safety & Frame Upgrades

Summary In this guide, I’d like to show how I upgraded my 2nd Anet A8 with just minimal suggested upgrades that improve the safety and structural integrity of the printer with minimal costs. My first Anet A8 I went all out on, upgraded to a metal frame, BLTouch, E3Dv6 hotend, Titan Extruder, Bowden setup, fans… I turned a $130 printer …

Challenging the 3D Printer Community

I am challenging the 3D Printing community to challenge me to a duel! I challenge everyone to come up with a challenge that you and I can duel it out on! Whether it is a design challenge, design and print, print something that’s out there on a 3D Printer model site, or coming up with a 3D Printer accessory… whatever …

3D Filament Drybox for a Single Roll

[embedyt] https://www.youtube.com/watch?v=YriatQOJfEI[/embedyt] Parts Needed (1) 4 inch 5/16 bolt (or 8mm threaded rod) (2) 5/16 nuts (or 8mm nuts for threaded rod) (1) PFTE Tube Cap – https://www.thingiverse.com/thing:2819721 (2) Rod End Holders – https://www.thingiverse.com/thing:2819721 (2) 8mm x 22mm x 7mm Bearings – http://amzn.to/2G9QKUU (2) Spool Plugs – https://www.thingiverse.com/thing:2773587 (1) Cereal Dry Box – http://amzn.to/2toGOnq (1) PC4 M6 PFTE fitting – …

3D Printed Kids Tools

I am working on creating a set of 3D printable kids tools. I currently have a collection posted on Thingiverse called “Robbie’s World Toolset” I named the collection after my son, whom I