
Be sure to bookmark a3d.fyi for quick access to UFO reveal posts.

Congrats to William R.
for winning the August 2023 Mothership Box!
This month, the Mothership prize is a 3D Chameleon Kit

SWAG & CODES
- Cereal Snacks
- Trading Cards
Please login to view codes if you received this months UFO.

Filament Samples
All filament samples are at least 20 meters in length (actually more, I increased the length to eat up the extra filament being left behind on the rolls)
Those looking for a sample spooler, MadMonkey designed this one and it's been my favorite so far https://www.printables.com/model/36621-expandable-sample-spool-holder
DSK has also made a sample spool specifically to fit the samples from the new machine: https://www.printables.com/model/428314-sample-spool-snap




Accessory
A830L Multimeter

Project!
+Nano version of the UFOs received an ESP32-WROOM
Levitator
Image by DSK
Programming the ESP32-WROOM Boards:
There are 2 ways you can program the board.
Arduino Web Editor:
One way is to use the Arduino web editor. You can create a project in the online editor and copy the code into it. Just follow the websites directions on getting the needed plug in installed. The board you would select is the esp32 dev module
Locally on PC:
First you will need the Arduino IDE installed on your computer. Which you can install from
https://www.arduino.cc/en/software . If you are using windows 11 I would suggest to download and install the legacy IDE version as new one gets some access denied errors.
Once the IDE is up and running you will need to install the esp32 board.
First thing you will need is to install the Espressif esp32 board library. You can do so by following the tutorial on the website below: [Note for our board select the esp32 dev board]
https://randomnerdtutorials.com/installing-the-esp32-board-in-arduino-ide-windows-instructions/
After the board is installed you can open up the .ino file for the project.
You can the select the board Esp32 Dev Module and the correct port and click upload.
This should compile the code and send it to the board for you!
You can earn 5% of every renewal for referral subscriptions each month by referring new customers. Simply visit https://www.alien3d.us/affiliate-area/ to see access your link or code! Contact me if you'd like a custom code instead of the auto generated one.
Community Reaction
-
Alien3D U.F.O. Filament Mystery Box - January 2019 - Chris's Basement
-
Alien3D U.F.O. Monthly Mystery Box - Jan 2019
-
Alien 3D Box Project // January 2019 // Temperature & Humidity Sensor
-
January 2019 Alien 3D UFO Box Unboxing
-
January U.F.O. Box Reveal
-
January Alien3D UFO Mystery Box!
-
Kuntry Time - Alien 3D UFO box January
-
January 2019 Alien3D UFO Monthly Subscription box review